Product Details:
|
Material: | Alumina -Zirconia | Product Name: | Flap Discs |
---|---|---|---|
Grit: | 40#60#80#120# | Customized Support: | OEM,OBM,ODM |
Usage: | Surface Grinding | Speed: | 80m/s |
High Light: | 115mm Sanding Flap Discs,Grit Zirconia Sanding Flap Discs,40-120 flap grinding disc |
115mm 4 1/2 Inch 40-120# Grit Zirconia Abrasive Sanding Flap Discs
1:Specification:
Abrasive Grains of Abrasive flap disc:
A/O - Calcine Aluminium oide and normal Aluminium oxide coated, for alloy steel and low-alloy steel
Z/A - Zirconia Alumina coated, for high-alloy, stainless, and heat-treated steel; high-tensile, non ferrous metals
S/C - Silicon Carbidecoated, for marble, stone, glass, and non ferrous metal.
It significantly improves life, grain retention and fray resistance.It's produced with raw material, stable and extremely high efficiency.
2:Product Details Form
Size | Material | Packing | Grit | Max Speed |
115mm | ALUMINIUM OXIDE | 200 or 400pcs | 40#-120# | 80m/s |
115mm | ZIRCONIA | 200 or 400pcs | 40#-120# | 80m/s |
3:Usage
Type for Abrasive flap disc:
T-27 – Flat shape, Used for grinding flat surfaces. Most efficient when used at a 0-15 degree angle
T-29 –Conical or Tapered shape, most used for contour and edge.
Flap Discs can replace resin grinding wheel, it has strong elasticity, high tensile and bending strength, high grinding rate, low noise, suitable for inside weld and stamping parts fly-edge grinding.
4:Attention:
Wear goggle, Wear earmuff, Follow safety rules, Wear protecting gloves, Donot use it freehand!
5: Storage Conditions
During storage, grinding wheels must not be subjected to:
.Exposure to humidity,water or other liquids
.Freezing temperatures
.Any temperature low enough to cause the formation of condensation on the wheels when moving from storage to an area of high temperature.
6:Application:
1.Bonded to extremely strong but durable fibreglass or plastic backing.
2.Fast ,aggressive action for high pressure grinding, high efficiency.
3.Blending and finishing all in one operation and will reduce process time, lower total grinding cost.
4.Maximum contact with work surface with out loading.
5.Consistent grinding and finishing performance.
6.Excellent performance and efficiencies on stainless and carbon steel application.
Contact Person: Peter Liu
Tel: +8618203993658